Advanced Filters
Category
    Manufacturer
    Model
    Used SCHLEICHER TYPE H-3, COIL FEEDER & STRAIGHTENER, 12" CAP. 3-ROLL, S/N-2404/44
    Sold
    SCHLEICHER TYPE H-3, COIL FEEDER & STRAIGHTENER, 12" CAP. 3-ROLL, S/N-2404/44
    Used 117" Slitter #4134
    Sold
    117" Slitter #4134
    Used Lot of RapidAir Air Feeds
    Sold
    Lot of RapidAir Air Feeds
    Used Rowe 10 In. x 12 Ga. Straightener; S/N 10047
    Sold
    Rowe 10 In. x 12 Ga. Straightener; S/N 10047
    Used C.O.E. 12 In. x 12 Ga. Servo Feeder
    Sold
    C.O.E. 12 In. x 12 Ga. Servo Feeder
    Used Servo Feeder
    Sold
    Servo Feeder
    Used 54"x .102" McKay Precision Straightener / Leveler
    Sold
    54"x .102" McKay Precision Straightener / Leveler
    Used Custom Built 12 In. x 12 Ga. Straightener Feeder
    Sold
    Custom Built 12 In. x 12 Ga. Straightener Feeder
    Used 18" x 24" COE MDL. CF 325 Straightener/Feeder; 18" Wide x 5 Roll Str.; 24" Air Feed
    Sold
    18" x 24" COE MDL. CF 325 Straightener/Feeder; 18" Wide x 5 Roll Str.; 24" Air Feed
    Used Cooper Weymouth Straightener Feeder
    Sold
    Cooper Weymouth Straightener Feeder
    Used Straightener
    Sold
    Straightener
    Used RapidAir Straightener
    Sold
    RapidAir Straightener
    Used 10" x 14 Ga. Durant Stock Straightener, Head Only; S/N 47-139
    Sold
    10" x 14 Ga. Durant Stock Straightener, Head Only; S/N 47-139
    Used 56" Wean Stock Leveler/Straightener
    Sold
    56" Wean Stock Leveler/Straightener
    Used Vamco Mdl. V663 Roll Feed; S/N V3S618T712P
    Sold
    Vamco Mdl. V663 Roll Feed; S/N V3S618T712P
    Used 2-Plane 14-Roll Wire Straightener
    Sold
    2-Plane 14-Roll Wire Straightener
    Used 36" x 16 ga. Press Room Equipment Model PMS 3625 PLC / Hyd. Driven Straightener / Feeder; Cabinet Base Type
    Sold
    36" x 16 ga. Press Room Equipment Model PMS 3625 PLC / Hyd. Driven Straightener / Feeder; Cabinet Base Type
    Used 36" x 16 ga. C.O.E. Model 225-36 Servo Driven Straightener / Feeder; Cabinet Base Type
    Sold
    36" x 16 ga. C.O.E. Model 225-36 Servo Driven Straightener / Feeder; Cabinet Base Type
    Used 25,000lb x 48'' LITTELL Double End Coil Reel; with coil car
    Sold
    25,000lb x 48'' LITTELL Double End Coil Reel; with coil car
    Used 25,000lb x 48'' LITTELL Double End Coil Reel; with coil car
    Sold
    25,000lb x 48'' LITTELL Double End Coil Reel; with coil car
    Used 6" SUTTON Tube & Bar Straightener; Model # 2; S/N: 641
    Sold
    6" SUTTON Tube & Bar Straightener; Model # 2; S/N: 641
    Used 15'' x .080 ROWE STOCK STRAIGHTENER; Mdl. # A-15; 3 over 4, .020- .080 thick; S/N 21588
    Sold
    15'' x .080 ROWE STOCK STRAIGHTENER; Mdl. # A-15; 3 over 4, .020- .080 thick; S/N 21588
    Used 14 ga x 5" Precision Stock Straightener/Feeder for Cut to Length Line; With PLR Controller
    Sold
    14 ga x 5" Precision Stock Straightener/Feeder for Cut to Length Line; With PLR Controller
    Used 30'' ROWE Feeder/Straightener; Cabinet Base; Model.# C3-30
    Sold
    30'' ROWE Feeder/Straightener; Cabinet Base; Model.# C3-30
    Used 12'' x 18” DALLAS Air Feed w/cabinet base; Model #: DECS1818; S/N: 14860
    Sold
    12'' x 18” DALLAS Air Feed w/cabinet base; Model #: DECS1818; S/N: 14860
    Used 30" x .090 ga. ROWE Cabinet Base Roll Feed; Model # FTCB-30; S/N 21585
    Sold
    30" x .090 ga. ROWE Cabinet Base Roll Feed; Model # FTCB-30; S/N 21585
    Used 0.050" x 36" Bradbury Precision Corrective Leveller; Model # LEVELLER; S/N 19985
    Sold
    0.050" x 36" Bradbury Precision Corrective Leveller; Model # LEVELLER; S/N 19985
    Used 24"x24" Dallas Feeder: 6-Roll, 24" Stroke (Air Type)
    Sold
    24"x24" Dallas Feeder: 6-Roll, 24" Stroke (Air Type)
    Used 60" LOCKFORMER Coil Reel
    Sold
    60" LOCKFORMER Coil Reel
    Used 100 Lb. x 3" Altair Mdl.T-50 Dbl. End Coil Reel, Mfg. 1982
    Sold
    100 Lb. x 3" Altair Mdl.T-50 Dbl. End Coil Reel, Mfg. 1982
    Used 2 1/2" GRINDLEY Hydro-Dynamic Bar Feed System; w/8 Feed Tubes & Misc. Parts
    Sold
    2 1/2" GRINDLEY Hydro-Dynamic Bar Feed System; w/8 Feed Tubes & Misc. Parts
    Used 5,000 Lb. COOPER WEYMOUTH Coil Cradle; 18" Wide, Motorized, Looping Control, Wheel Mtd.
    Sold
    5,000 Lb. COOPER WEYMOUTH Coil Cradle; 18" Wide, Motorized, Looping Control, Wheel Mtd.
    Used 3,000 Lb. U.S. TOOL CO. Coil Cradle; 10" Wide, Motorized, Looping Control, Wheel Mtd,
    Sold
    3,000 Lb. U.S. TOOL CO. Coil Cradle; 10" Wide, Motorized, Looping Control, Wheel Mtd,
    Used 2,500 LB. AMERICAN Mdl. 60 Coil Reel, 18" Wide, 1972
    Sold
    2,500 LB. AMERICAN Mdl. 60 Coil Reel, 18" Wide, 1972
    Used RAPID AIR Mdl. R23AS Roll Feed; S/N N/A
    Sold
    RAPID AIR Mdl. R23AS Roll Feed; S/N N/A
    Used 20,000 Lb. IOWA PRECISION Motorized Coil Reel; w/Coil Car, 48" Coil Width, 90" Max. Coil Diameter
    Sold
    20,000 Lb. IOWA PRECISION Motorized Coil Reel; w/Coil Car, 48" Coil Width, 90" Max. Coil Diameter
    Used 4,000 Lb. KNUDSON Mdl. 1706 Motorized Coil Reel, 48" Wide, 1970's
    Sold
    4,000 Lb. KNUDSON Mdl. 1706 Motorized Coil Reel, 48" Wide, 1970's
    Used 10,000 Lb. AMERICAN Coil Reel, 72" O.D.; 16"-21" I.D; Variable Speed, Air Clutch/Brake, 1980s
    Sold
    10,000 Lb. AMERICAN Coil Reel, 72" O.D.; 16"-21" I.D; Variable Speed, Air Clutch/Brake, 1980s
    Used 5,000 Lb. LOOPCO Coil Upender; 4' x 4' Table
    Sold
    5,000 Lb. LOOPCO Coil Upender; 4' x 4' Table
    Used 6' Wide CUSTOM BUILT Straightener
    Sold
    6' Wide CUSTOM BUILT Straightener
    Used 8" X 12" P.R.E. Mdl. B15-8x12-288A Air Feed Unit
    Sold
    8" X 12" P.R.E. Mdl. B15-8x12-288A Air Feed Unit
    Used P.R.E. Mdl. PRT-12250-DC Coil Reel, 3" Coil I.D., 24" Coil O.D., w/Control Pedestal For C.T.L.
    Sold
    P.R.E. Mdl. PRT-12250-DC Coil Reel, 3" Coil I.D., 24" Coil O.D., w/Control Pedestal For C.T.L.
    Used 2,000 Lb. AMERICAN Coil Upender, Hydraulic, 3'x3" Platform,Foot Pedal Control
    Sold
    2,000 Lb. AMERICAN Coil Upender, Hydraulic, 3'x3" Platform,Foot Pedal Control
    Used 36" x 16 Ga. REGAL Straightener, 3 over 4, 2 1/2" Dia. Rolls, Cabinet Base, Variable Speed
    Sold
    36" x 16 Ga. REGAL Straightener, 3 over 4, 2 1/2" Dia. Rolls, Cabinet Base, Variable Speed
    Used 36" x 12 Ga. NIAGARA Roll Feed, Servo Driven with P C Controls, Cabinet Base, EXCELLENT CONDITION
    Sold
    36" x 12 Ga. NIAGARA Roll Feed, Servo Driven with P C Controls, Cabinet Base, EXCELLENT CONDITION
    Used 10" x 16 Ga. DURANT Straightening Machine, 1 1/2" Dia Rolls, Cabinet Base, Variable Speed, NICE!
    Sold
    10" x 16 Ga. DURANT Straightening Machine, 1 1/2" Dia Rolls, Cabinet Base, Variable Speed, NICE!
    Used 1,000Lb.x10" COOPER-WEYMOUTH-PETERSON Coil Reel
    Sold
    1,000Lb.x10" COOPER-WEYMOUTH-PETERSON Coil Reel
    Used 6" x 6" WITTECK Air Feed; e/w 4 Way Air Control Valve
    Sold
    6" x 6" WITTECK Air Feed; e/w 4 Way Air Control Valve
    Used 2" x .050 RAPID-AIR Mdl. P1V Roll Feed, 34" Pass Line, 1/4 H.P., S/N N/A, 1980's
    Sold
    2" x .050 RAPID-AIR Mdl. P1V Roll Feed, 34" Pass Line, 1/4 H.P., S/N N/A, 1980's
    Used 2" x .050 RAPID-AIR Mdl. P1V Roll Feed, 34" Pass Line, 1/4 H.P., S/N 58589, 1980's
    Sold
    2" x .050 RAPID-AIR Mdl. P1V Roll Feed, 34" Pass Line, 1/4 H.P., S/N 58589, 1980's
    Used AMERICAN Mdl. 2500 Steel Line Coil Reel; 20" Arms
    Sold
    AMERICAN Mdl. 2500 Steel Line Coil Reel; 20" Arms
    Used UNIVERSAL Mdl. 3.5 LS Coil Winding Machine, 1/3 HP, 1979
    Sold
    UNIVERSAL Mdl. 3.5 LS Coil Winding Machine, 1/3 HP, 1979
    Used UNIVERSAL Mdl. 3.5 LS Coil Winding Machine, 1/3 HP, Many Options, 1979
    Sold
    UNIVERSAL Mdl. 3.5 LS Coil Winding Machine, 1/3 HP, Many Options, 1979
    Used 2,000 Lb. ROWE Coil Cradle, 40" O.D. (Max.), 1/2 H.P.
    Sold
    2,000 Lb. ROWE Coil Cradle, 40" O.D. (Max.), 1/2 H.P.
    Used GLOBE Coil Winder, 3 H.P. @ 1755 RPM
    Sold
    GLOBE Coil Winder, 3 H.P. @ 1755 RPM
    Used FT. WAYNE/ESSEX Mdl. 108 & GLOBE Mdl. HF7W11 Coil Winders, Late Models, Pkg. Deal
    Sold
    FT. WAYNE/ESSEX Mdl. 108 & GLOBE Mdl. HF7W11 Coil Winders, Late Models, Pkg. Deal
    Used 30,000 Lb. WEAN-UNITED Coil Reel, 60" Wide, 72" O.D., w/50 HP U.S. Varidyne Frequency Controlled Drive
    Sold
    30,000 Lb. WEAN-UNITED Coil Reel, 60" Wide, 72" O.D., w/50 HP U.S. Varidyne Frequency Controlled Drive
    Used 12" x 1/4" NIAGARA Double End Roll Feed System W/ Scrap Chopper
    Sold
    12" x 1/4" NIAGARA Double End Roll Feed System W/ Scrap Chopper
    Used 10,000 Lb. AMERICAN Coil Reel, 48" Width; 72" O.D.; 16"-21" I.D; Variable Speed, Air Clutch/Brake, 1980s
    Sold
    10,000 Lb. AMERICAN Coil Reel, 48" Width; 72" O.D.; 16"-21" I.D; Variable Speed, Air Clutch/Brake, 1980s
    Used DALLAS Air Feed Cabinet Base Type
    Sold
    DALLAS Air Feed Cabinet Base Type
    Used LITTEL 4000 Lb. Uncoiler
    Sold
    LITTEL 4000 Lb. Uncoiler
    Used 5,000 Lb. U.S. BAIRD Coil Cradle, 16" Wide, Motorized, Looping Control, S/N N/A
    Sold
    5,000 Lb. U.S. BAIRD Coil Cradle, 16" Wide, Motorized, Looping Control, S/N N/A
    Used 2,500 Lb AMERICAN Mdl 60 Coil Reel, 18" Wide, Vari-Speed, 1970's, 2 Available
    Sold
    2,500 Lb AMERICAN Mdl 60 Coil Reel, 18" Wide, Vari-Speed, 1970's, 2 Available
    Used JACO 4000 Lb Uncoiler
    Sold
    JACO 4000 Lb Uncoiler
    Used COOPER-WEYMOUTH-PETERSON Air Feed, 6"x8"-14" Str., Bolster Mounted,Servo Drive
    Sold
    COOPER-WEYMOUTH-PETERSON Air Feed, 6"x8"-14" Str., Bolster Mounted,Servo Drive
    Used COOPER-WEYMOUTH-PETERSON Air Feed, 8" Str., Bolster Mounted
    Sold
    COOPER-WEYMOUTH-PETERSON Air Feed, 8" Str., Bolster Mounted
    Used Air Feed
    Sold
    Air Feed
    Used ROWE Mdl. 2018-PR Coil Cradle; S/N 4774
    Sold
    ROWE Mdl. 2018-PR Coil Cradle; S/N 4774
    Used COOPER-WEYMOUTH-PETERSON Mdl. 18HRL Air Feed, Bolster Mounted
    Sold
    COOPER-WEYMOUTH-PETERSON Mdl. 18HRL Air Feed, Bolster Mounted
    Used 2,000 Lb. U.S. TOOL Coil Cradle, 10" Wide, Motorized, Looping Control, Wheels/Locking
    Sold
    2,000 Lb. U.S. TOOL Coil Cradle, 10" Wide, Motorized, Looping Control, Wheels/Locking
    Used LITTELL Roll Feed; Bolster Mounted Type,20"x10 Ga,0-36"Feed Length
    Sold
    LITTELL Roll Feed; Bolster Mounted Type,20"x10 Ga,0-36"Feed Length
    Used 10,000 Lb. LITTELL Coil Cradle/Straighter, 20" W x .250 (Max), 72" O.D., V.S Dr.
    Sold
    10,000 Lb. LITTELL Coil Cradle/Straighter, 20" W x .250 (Max), 72" O.D., V.S Dr.
    Used 4" Wide x 6 BAIRD Roll Straightner w/Pinch Rolls
    Sold
    4" Wide x 6 BAIRD Roll Straightner w/Pinch Rolls
    Used 6" x .050 U.S. BAIRD Stock Straightener, 7 Roll x 1 1/2" Dia., Entry/Exit Guides,
    Sold
    6" x .050 U.S. BAIRD Stock Straightener, 7 Roll x 1 1/2" Dia., Entry/Exit Guides,
    Used U.S. TOOL Scrap Chopper, 3/4 HP, 100 SPM, Swivel Stand
    Sold
    U.S. TOOL Scrap Chopper, 3/4 HP, 100 SPM, Swivel Stand
    Used U.S. TOOL Stock Feeder, Slide Type, Mechanical
    Sold
    U.S. TOOL Stock Feeder, Slide Type, Mechanical
    Used U.S. TOOL Scrap Chopper, 3/4 HP, 100 SPM, Swivel Stand
    Sold
    U.S. TOOL Scrap Chopper, 3/4 HP, 100 SPM, Swivel Stand
    Used COOPER-WEYMOUTH 6" Slide Feed w/Angle Brackets; S/N CW68-1386
    Sold
    COOPER-WEYMOUTH 6" Slide Feed w/Angle Brackets; S/N CW68-1386
    Used U.S. TOOL Stock Feeder, Slide Type, Mechanical
    Sold
    U.S. TOOL Stock Feeder, Slide Type, Mechanical
    Used 4" x .050 RAPID-AIR Mdl. P4V Roll Feed, 34" Pass Line, 1/4 H.P., S/N N/A, 1980's
    Sold
    4" x .050 RAPID-AIR Mdl. P4V Roll Feed, 34" Pass Line, 1/4 H.P., S/N N/A, 1980's
    Used 15" x .050 ROWE Stock Straightner, 7 Roll x 2 1/4" Dia., V.S. Drive, Clean
    Sold
    15" x .050 ROWE Stock Straightner, 7 Roll x 2 1/4" Dia., V.S. Drive, Clean
    Used 750 Lb. REGAL Mdl. 750 125 RP Coil Reel, Motorized, 12" Wide, Late Model
    Sold
    750 Lb. REGAL Mdl. 750 125 RP Coil Reel, Motorized, 12" Wide, Late Model
    Used 600 Lb. LITTELL #5 Coil Reel ;Single End; Drag Type
    Sold
    600 Lb. LITTELL #5 Coil Reel ;Single End; Drag Type
    Used 20 Ton JOHNSON O.B.I. Press (Complete/Operational)
    Sold
    20 Ton JOHNSON O.B.I. Press (Complete/Operational)
    Used 3" x .050 COOPER-WEYMOUTH Stock Straightener, Bench Mounted, 5 Roll x 1 3/4" Dia
    Sold
    3" x .050 COOPER-WEYMOUTH Stock Straightener, Bench Mounted, 5 Roll x 1 3/4" Dia
    Used 1,500 Lb. REGAL Mdl 1500-12SRNP Coil Reel, Motorized, 12" Width, 1980's
    Sold
    1,500 Lb. REGAL Mdl 1500-12SRNP Coil Reel, Motorized, 12" Width, 1980's
    Used 12" x .125 AMERICAN Double Pinch Straightener, 7 Roll x 3" Dia., V.S. Drive, S/N 3697, Mfg. 1972
    Sold
    12" x .125 AMERICAN Double Pinch Straightener, 7 Roll x 3" Dia., V.S. Drive, S/N 3697, Mfg. 1972
    Used AMERICAN 2500 Lb. Model #60 Coil Reel; S/N #3686; Mfg. 1972
    Sold
    AMERICAN 2500 Lb. Model #60 Coil Reel; S/N #3686; Mfg. 1972
    Used 12,000 Lb. WESTBEND No. CR6000 Upender, 100" x 120" Platforms, Largest in Country
    Sold
    12,000 Lb. WESTBEND No. CR6000 Upender, 100" x 120" Platforms, Largest in Country
    Used HENRY & WRIGHT 3" Power Straightener: S/N 48387
    Sold
    HENRY & WRIGHT 3" Power Straightener: S/N 48387
    Used 3" x .065 COOPER-WEYMOUTH Mdl. DDR 32 XH, Roll Feed, 2" Feed, Never Used, 1985
    Sold
    3" x .065 COOPER-WEYMOUTH Mdl. DDR 32 XH, Roll Feed, 2" Feed, Never Used, 1985
    Used 8,000 Lb. LITTELL Mdl. 424-5P-D Coil Cradle/Straightener; 24" W. x .078" (Max.), 48" O.D., V.S. Drive
    Sold
    8,000 Lb. LITTELL Mdl. 424-5P-D Coil Cradle/Straightener; 24" W. x .078" (Max.), 48" O.D., V.S. Drive
    Used 24"x.196 LITTELL Mdl. 426, Straightener/Feeder; 7 Roll x 4 1/4" Dia., V.S. Drive, Mint
    Sold
    24"x.196 LITTELL Mdl. 426, Straightener/Feeder; 7 Roll x 4 1/4" Dia., V.S. Drive, Mint
    Used 8,000Lb. ROWE Mdl. 11C20 Coil Cradle/Straightener;
    Sold
    8,000Lb. ROWE Mdl. 11C20 Coil Cradle/Straightener;
    Used LITTEL Mdl. 90-30 Motorized Coil Reel
    Sold
    LITTEL Mdl. 90-30 Motorized Coil Reel
    Used 15"x .125" ROWE Mdl. FTCB-15 Roll Feed; 40" Pass Line; Elect. Clutch/Brake
    Sold
    15"x .125" ROWE Mdl. FTCB-15 Roll Feed; 40" Pass Line; Elect. Clutch/Brake
    Used COOPER-WEYMOUTH Mdl.LF66RH Air Feed;S/N 0767
    Sold
    COOPER-WEYMOUTH Mdl.LF66RH Air Feed;S/N 0767
    Used COOPER-WEYMOUTH Mdl.LF66LH, Air Feed; S/N 0768
    Sold
    COOPER-WEYMOUTH Mdl.LF66LH, Air Feed; S/N 0768
    Used SELECT-O-MATIC Air Feed
    Sold
    SELECT-O-MATIC Air Feed
    Used COOPER-WEYMOUTH PETERSON PNEUMATIC SLIDE FEED, MDL. 18SRL, S/N CWP18SRL3230
    Sold
    COOPER-WEYMOUTH PETERSON PNEUMATIC SLIDE FEED, MDL. 18SRL, S/N CWP18SRL3230
    Used FEED LEASE Air Feeder; MDL. FL1 1/2; S/N 2159
    Sold
    FEED LEASE Air Feeder; MDL. FL1 1/2; S/N 2159
    Used Air Feeds Coil Reel; 4,000 Lb. Capacity; Mdl. R-40; S/N 790866
    Sold
    Air Feeds Coil Reel; 4,000 Lb. Capacity; Mdl. R-40; S/N 790866
    Used ROWE COIL REEL MDL. 100-40-DS/J, S/N 16323
    Sold
    ROWE COIL REEL MDL. 100-40-DS/J, S/N 16323
    Used ROWE Mdl. C-40
    Sold
    ROWE Mdl. C-40
    Used LITTELL STRAIGHTNER MDL. 312-7PDL, S/N 6801860
    Sold
    LITTELL STRAIGHTNER MDL. 312-7PDL, S/N 6801860
    Used ENGEL CUT-TO-LENGTH LINE, MDL.5-18 EMM, S/N 300033
    Sold
    ENGEL CUT-TO-LENGTH LINE, MDL.5-18 EMM, S/N 300033
    Used 750 Lb. DURANT Mdl. DDSC-1 Double End Coil Reel, 10" Wide
    Sold
    750 Lb. DURANT Mdl. DDSC-1 Double End Coil Reel, 10" Wide
    Used Coil Reel; 5,000 Lb. Cap
    Sold
    Coil Reel; 5,000 Lb. Cap
    Used 4,000 lbs AMERICAN Coil Reel, 30" W. x 48" O.D., 16" - 22" I.D., Nice Machine, 1971
    Sold
    4,000 lbs AMERICAN Coil Reel, 30" W. x 48" O.D., 16" - 22" I.D., Nice Machine, 1971
    Used 750 Lb. REGAL Mdl. 750-12 Double End Coil Reel
    Sold
    750 Lb. REGAL Mdl. 750-12 Double End Coil Reel
    Used 750 Lb. REGAL Mdl. 750-12 Double End Coil Reel, 12" Wide
    Sold
    750 Lb. REGAL Mdl. 750-12 Double End Coil Reel, 12" Wide
    Used LITTELL 600 Lb. No. 5 Double Auto Centering Reel
    Sold
    LITTELL 600 Lb. No. 5 Double Auto Centering Reel
    Used 750 Lb. REGAL Mdl. 750-12 Double End Coil Reel, 12" Wide, S/N 8731236; 1980's
    Sold
    750 Lb. REGAL Mdl. 750-12 Double End Coil Reel, 12" Wide, S/N 8731236; 1980's
    Used 750 Lb. DURANT Mdl. DDSC-1 Double End Coil Reel, 10" Wide, 2 Avail
    Sold
    750 Lb. DURANT Mdl. DDSC-1 Double End Coil Reel, 10" Wide, 2 Avail
    Used REGAL 3501 Single Reel
    Sold
    REGAL 3501 Single Reel
    Used LITTELL 300 Lb. No. 3 AutoCentring Reel; Serial #S-9229-63
    Sold
    LITTELL 300 Lb. No. 3 AutoCentring Reel; Serial #S-9229-63
    Used COOPER-WEYMOUTH Coil Reel; Single Drag Type
    Sold
    COOPER-WEYMOUTH Coil Reel; Single Drag Type
    Used LITTELL 600 Lb. No. 5 Double Centering Reel; Serial #9605-53-6
    Sold
    LITTELL 600 Lb. No. 5 Double Centering Reel; Serial #9605-53-6
    Used LITTELL No. 5 Double Centering Reel; S/N 600 Lb. Capacity
    Sold
    LITTELL No. 5 Double Centering Reel; S/N 600 Lb. Capacity
    Used LITTELL No. 10 Centering Reel; S/N 10-RS52
    Sold
    LITTELL No. 10 Centering Reel; S/N 10-RS52
    Used 600 Lb. COOPER-WEYMOUTH Coil Reel; 10" Wide, 48" O.D.
    Sold
    600 Lb. COOPER-WEYMOUTH Coil Reel; 10" Wide, 48" O.D.
    Used 2,500 Lb. LITTELL No. 25 Coil Reel; 36" W. x 40" O.D; 18" - 22" I.D.
    Sold
    2,500 Lb. LITTELL No. 25 Coil Reel; 36" W. x 40" O.D; 18" - 22" I.D.
    Used 4,000 Lb. AUTOMATIC Coil Reel; 36" W x 54" O.D, 15 3/4"-21" I.D., Man. Expansion
    Sold
    4,000 Lb. AUTOMATIC Coil Reel; 36" W x 54" O.D, 15 3/4"-21" I.D., Man. Expansion
    Used 2,000 Lb. ROWE Mdl. 2024J-PR Coil Cradle; 40" Max O.D.; 24" Max Width
    Sold
    2,000 Lb. ROWE Mdl. 2024J-PR Coil Cradle; 40" Max O.D.; 24" Max Width
    Used DAHLSTRAM 36" Power Straightener
    Sold
    DAHLSTRAM 36" Power Straightener
    Used LITTELL MODEL 6-60 POWER DRIVEN COIL CRADLE
    Sold
    LITTELL MODEL 6-60 POWER DRIVEN COIL CRADLE
    Used COOPER WEYMOUTH COMBINATION CRADLE & STRAIGHTENER
    Sold
    COOPER WEYMOUTH COMBINATION CRADLE & STRAIGHTENER
    Used LITTELL DOUBLE END AUTOMATIC CENTERING REEL, DRAG TYPE
    Sold
    LITTELL DOUBLE END AUTOMATIC CENTERING REEL, DRAG TYPE
    Used LITTELL POWER STRAIGHTENER, MDL. 308-9PDS
    Sold
    LITTELL POWER STRAIGHTENER, MDL. 308-9PDS
    Used LITTELL COIL REEL, NO. 25
    Sold
    LITTELL COIL REEL, NO. 25
    Used .125 x 6" COOPER-WEYMOUTH Mdl SC-2 Power Scrap Chopper, 190 SPM. Horiz/Vert, 1 HP, S/N SC2-2118
    Sold
    .125 x 6" COOPER-WEYMOUTH Mdl SC-2 Power Scrap Chopper, 190 SPM. Horiz/Vert, 1 HP, S/N SC2-2118
    Used PERFECTO 6" STRAIGHTENER
    Sold
    PERFECTO 6" STRAIGHTENER
    Used BENCHMASTER #910 STRAIGHTENER
    Sold
    BENCHMASTER #910 STRAIGHTENER
    Used NO.5 LITTELL PLAIN AUTOMATIC CENTERING REEL
    Sold
    NO.5 LITTELL PLAIN AUTOMATIC CENTERING REEL
    Used 12" LITTELL MODEL 312 POWER STRAIGHTENER
    Sold
    12" LITTELL MODEL 312 POWER STRAIGHTENER
    Used LITTELL NO.10 MOTOR DRIVEN AUTOMATIC CENTERING REEL
    Sold
    LITTELL NO.10 MOTOR DRIVEN AUTOMATIC CENTERING REEL
    Used REEL - MACHINE TAKEN OUT OF INVENTORY
    Sold
    REEL - MACHINE TAKEN OUT OF INVENTORY
    Used LITTELL 4000 LBS COIL CRADLE,DRAG TYPE
    Sold
    LITTELL 4000 LBS COIL CRADLE,DRAG TYPE
    Used REEL - MACHINE TAKEN OUT OF INVENTORY
    Sold
    REEL - MACHINE TAKEN OUT OF INVENTORY
    Used COOPER-WEYMOUTH-PETERSON Mdl. 18, PN2219 Hydraulic Air Feed, 8" Str., Bolster Mounted
    Sold
    COOPER-WEYMOUTH-PETERSON Mdl. 18, PN2219 Hydraulic Air Feed, 8" Str., Bolster Mounted
    Used 12" x .125 COIL MATIC Model RF1212 Air Feed, 12" Stroke, 80 S.P.M., New, 1977
    Sold
    12" x .125 COIL MATIC Model RF1212 Air Feed, 12" Stroke, 80 S.P.M., New, 1977
    Used 16" ROWE Uncoiler
    Sold
    16" ROWE Uncoiler
    Used ROWE Feeder Control Console
    Sold
    ROWE Feeder Control Console
    Used NIAGARA Feeder Control
    Sold
    NIAGARA Feeder Control
    Used 18"x.093 COOPER-WEYMOUTH Mdl 18B Stock Straightener, 7 Roll x 2" Dia., 1978
    Sold
    18"x.093 COOPER-WEYMOUTH Mdl 18B Stock Straightener, 7 Roll x 2" Dia., 1978
    Used 16" x .200 COOPER/WEYMOUTH Single Roll Feed; Crankshaft Driven;
    Sold
    16" x .200 COOPER/WEYMOUTH Single Roll Feed; Crankshaft Driven;
    Used 7500 Lb. ROWE Model 7540-DSV Uncoiler
    Sold
    7500 Lb. ROWE Model 7540-DSV Uncoiler
    Used HILLES & JONES Coil Stock Straightner;
    Sold
    HILLES & JONES Coil Stock Straightner;
    Used 36" x 16 ga. Regal Straightener/Feeder
    Sold
    36" x 16 ga. Regal Straightener/Feeder
    Used 6" x 30" Model AF Air Feed Stock Feeder
    Sold
    6" x 30" Model AF Air Feed Stock Feeder
    Used Lorenz Precision Leveler 320mm/12" x 5mm/.196
    Sold
    Lorenz Precision Leveler 320mm/12" x 5mm/.196
    Year
    2000
    Stock thickness
    5.00mm
    Stock width
    320mm
    Diameter of rolls
    30mm
    Used 10 ga x 6" PRE Feeder Model S15-GX24-128A-R
    Sold
    10 ga x 6" PRE Feeder Model S15-GX24-128A-R
    To the top